Featured

  • Wholesale Bolt Connected Fuse Links Factory –  Bolt Connected Square Pipe Type Fast-acting Fuse Links For Semiconductor protection  – Mersen

    Wholesale Bolt Connected Fuse Links Factory – Bolt Connected Square Pipe Type Fast-acting Fuse Links For Semiconductor protection – Mersen

    Applications This series of fuses are mainly used in circuits of AC 50Hz, rated voltage of 2000V and rated current of 2500A, to protect the semiconductor components and the whole unit from circuit short (aR). The breaking capacity of the fuses is up to 100kA. The fuses are compliant with the IEC60269-1 / IEC60269-4 and GB13539.1 / GB/T13539.4. Design Features The variable cross-section fuse element made from pure silver sheets are sealed in the melting tube made of high-density porc...
  • China High Quality Fuse Base –  Cylindrical Fuse Holders – Mersen

    China High Quality Fuse Base – Cylindrical Fuse Holders – Mersen

    Applications These fuse holders are supporters for fuses with size up to 22 58mm, Then are capable of working under heat caused by lt can also function as a fuse disconnecting switch by multi-phase combination. There are two in/out lines at the RT18N fuse base, providing a power cut function. The RT18L type has a safety lock the fuse carrier when disconnected to avoid wrong operation, it can also be equipped with an indicator, which goes on when the fuse link breaks. Rated insulate voltage up...
  • Wholesale Fuse Monitoring Devices Supplier –  Fuse monitoring devices – Mersen

    Wholesale Fuse Monitoring Devices Supplier – Fuse monitoring devices – Mersen

    Applications This series of Fuse monitoring devices are used in electric lines of 50Hz AC and rated voltage up to 1000V as melting signal / siren for the fuse links. Design Features It is made up of the following parts:1. Melt striker, 2. Micro switch (with one normal close contact and one normal open contact), 3. A base for the striker and the switch. Fuse monitoring devices are usually paralleled under the lid fastening screws at the ends of the fuse. When the fuse breaks, the str...
  • Automotive Fuse Block With Flasher Manufacturer –  Automobile Fuse – Mersen

    Automotive Fuse Block With Flasher Manufacturer – Automobile Fuse – Mersen

    Applications Protection against overloads and circuit short in electric lines.Rated voltage up to 80V DC or 50Hz 130V AC, Rated current up to 800A. Design Features This series of vehicle fuses are made up with two parts, fuse links and fuse bases. According to different applications, the fuse links can be divided into normal type (CNL, RQ1) and fast type (CNN), both bolting connected. The fuse links can be connected directly to an installed fuse base (RQD-2) for convenient fuse exchange. Basi...
  • China High Quality Cylindrical Fuse Links Supplier –  DC Solar Cylindrical Fuse Links – Mersen

    China High Quality Cylindrical Fuse Links Supplier – DC Solar Cylindrical Fuse Links – Mersen

    Applications Protection against overload and short circuit in electric lines(type gG), also available for protection of semiconductor parts and equipments against short-circuit (type aR) and protection of motors (type aM).Rated voltage up to 690V; Rated current up to 125A; Working frequency 50Hz AC; Rated breaking capacity up to 100kA, Compliant with GB 13539 and IEC 60269. Design Features Variable cross-section fuse element made from pure metal sealed in cartridge made from high-duty ceramic...
  • Bolt Connected Round Cartridge Type Fast-Acting Fuse Links For Semiconductor Protection Manufacturers –  Bolt Connected Square Pipe Type Fast-acting Fuse Links For Semiconductor protection  ...

    Bolt Connected Round Cartridge Type Fast-Acting Fuse Links For Semiconductor Protection Manufacturers – Bolt Connected Square Pipe Type Fast-acting Fuse Links For Semiconductor protection – Mersen

    Applications This series of fuses are mainly used in circuits of AC 50Hz, rated voltage of 2000V and rated current of 2500A, to protect the semiconductor components and the whole unit from circuit short (aR). The breaking capacity of the fuses is up to 100kA. The fuses are compliant with the IEC60269-1 / IEC60269-4 and GB13539.1 / GB/T13539.4. Design Features The variable cross-section fuse element made from pure silver sheets are sealed in the melting tube made of high-density porc...
  • Fuse Links Supplier –  Non-Filler Renewable Fuse Links – Mersen

    Fuse Links Supplier – Non-Filler Renewable Fuse Links – Mersen

    Applications Protection against overload and short-circuit in electric lines (type gG). Rated voltage up to 250V/600V; Rated current up to 200A; Working frequency 50Hz AC; Rated breaking capacity up to 10kA. Compliant with Gb13539. Design Features Cylindrical cap contacts for rated current up to 60A, and knife contacts for rated current up to 600A, Variable cross-section fuse element made from zinc alloy. Users can replace the burnt fuse element easily and use the fuse again. Basic Data The m...
  • Fuse Base Manufacturers –  Cylindrical Fuse Holders – Mersen

    Fuse Base Manufacturers – Cylindrical Fuse Holders – Mersen

    Applications These fuse holders are supporters for fuses with size up to 22 58mm, Then are capable of working under heat caused by lt can also function as a fuse disconnecting switch by multi-phase combination. There are two in/out lines at the RT18N fuse base, providing a power cut function. The RT18L type has a safety lock the fuse carrier when disconnected to avoid wrong operation, it can also be equipped with an indicator, which goes on when the fuse link breaks. Rated insulate voltage up...
  • Wholesale Thermal Fuse Links Suppliers –  Non-Filler Renewable Fuse Links – Mersen

    Wholesale Thermal Fuse Links Suppliers – Non-Filler Renewable Fuse Links – Mersen

    Applications Protection against overload and short-circuit in electric lines (type gG). Rated voltage up to 250V/600V; Rated current up to 200A; Working frequency 50Hz AC; Rated breaking capacity up to 10kA. Compliant with Gb13539. Design Features Cylindrical cap contacts for rated current up to 60A, and knife contacts for rated current up to 600A, Variable cross-section fuse element made from zinc alloy. Users can replace the burnt fuse element easily and use the fuse again. Basic Data The m...
  • Wholesale Auto Fuse Link Manufacturers –  DC Solar Cylindrical Fuse Links – Mersen

    Wholesale Auto Fuse Link Manufacturers – DC Solar Cylindrical Fuse Links – Mersen

    Applications Protection against overload and short circuit in electric lines(type gG), also available for protection of semiconductor parts and equipments against short-circuit (type aR) and protection of motors (type aM).Rated voltage up to 690V; Rated current up to 125A; Working frequency 50Hz AC; Rated breaking capacity up to 100kA, Compliant with GB 13539 and IEC 60269. Design Features Variable cross-section fuse element made from pure metal sealed in cartridge made from high-duty ceramic...
  • Wholesale 32 Amps Fuse Carrier Manufacturers –  Fuse Carrier (Handle) – Mersen

    Wholesale 32 Amps Fuse Carrier Manufacturers – Fuse Carrier (Handle) – Mersen

    Applications Protection against overload and short-circuit in electric lines(type gG), also available for protection of semiconductor parts and equipments against short-circuit (type aR) and protection of motors (type aM). Design Features Variable cross-section fuse element made from pure copper or silver sealed in cartridge made from high-duty ceramic, Fuse tube filled with chemically treated high-purity quartz sand as arc-extinguishing medium. Dot-welding of fuse element ends to t...
  • Fuse Monitoring Devices Suppliers –  Fuse monitoring devices – Mersen

    Fuse Monitoring Devices Suppliers – Fuse monitoring devices – Mersen

    Applications This series of Fuse monitoring devices are used in electric lines of 50Hz AC and rated voltage up to 1000V as melting signal / siren for the fuse links. Design Features It is made up of the following parts:1. Melt striker, 2. Micro switch (with one normal close contact and one normal open contact), 3. A base for the striker and the switch. Fuse monitoring devices are usually paralleled under the lid fastening screws at the ends of the fuse. When the fuse breaks, the str...